Numerical Control Hydraulic Press Brake

'ANASUYA' presents to you a range of most technically advanced N.C.hydraulic press brakes with all latest features as per international standards.

The NC Hydraulic Press Brake is manufactured from the latest developed technology ensuring high level performance. The Hydraulic NC Press Brakes are wellplaced in the international market.

Silent Features

• Suitable for complex job bending.
• Ram axis Y and back gauge axis X can be controlled.
• Bend angle & Depth mode programs.
• Highly precise Magnetic type press brake scale.
• Hardened & ground ball screw with linear motion bearings.
• 128 x 16 bend program memory
• Automatic degree & back gauge position as per program

NC value addition

• Dedicated controller with LCD monochrome screen & numeric keypad.
• Manual,Auto & Program mode selection through screen.
• 128 programs X 16 bends per program can be stored.
• Stroke control and stroke counter on screen
• Highly Precise glass tube optical linear scale for accurate Y-axis positioning.
• Repetitive accuracy within ± 0.03mm.
• Alarm, Fault & status pages to detect the problems.
• Password protected screen menus to safeguard program access.
• Various drive Interface like two-speed motor, stepper motor or AC Servo Motor.
• Hardened ground Ball screw and linear motion bearing for better position accuracy and longer life. Optional Timer belt drive.
• Various drive Interface like two-speed Main Drive Motor.
• Electrical control panel with selection of AUTO', 'INCH' & 'SINGLE CYCLE AUTO' mode operations.
• Movable work station with pair of foot switch.
• Pair of lifting links.
• Pair of sheet support.
• Fine stroke adjustment rod with limit switch.
• Manual back gauge with micro setting.
• One suitable five way die & Punch of EN-9** .(unhardened and ungrounded)
• Centralized lubrication system with flow control valves for adequate lubrication.
• Ram tilting arrangement on selected models.

Standard Accessories

• Main Drive Motor.
• Selection of 'AUTO' & 'MANUAL' mode through screen.
• Two axis dedicated controller with LCD monochrome screen & numeric keypad.
• 128 jobs X 16 bends program memory.
• Movable work station with pair of foot switch.
• AC Servo motor with resolver for back gauge drive.
• Hardened & Grounded Ball screw.
• Linear motion bearing on guide rods.
• Highly precise glass tube optical linear scale for accurate Y-axis position.
• Pair of lifting links.
• Pair of sheet support.
• One suitable five way die & Punch of EN-9** (unhardened and ungrounded).
• Centralized lubrication system with flow control valves for adequate lubrication.
• Ram tilting arrangement on selected models.

Optional Accessories

• AC servo drives for R-axis & Z-axis control of back gauging.
• Anti deflection unit (Manual / Motorized / Automatic)
• Sliding sheet support with Swing away stoppers.
• Hardened tools & special tools.
• Hydraulic tool clamping.
• Photo electric fingers safety guard.
• Higher throat depth.
• Automatic lubrication system.
• Fast cycling models for high productivity.
• First fill of hydraulic oil.

Short Facts

• Fitted with 2 Axes NC controller i.e., provided with NC stroke & NC back guage which offers better economy evers for multiple bend jobs. Setting for regular jobs can be stored in memory to save time. Allows air bending of different angles by memorizing stroke positions.
• Enables operator to bend jobs with 1 to 4 bends on each edge in one set up, reducing handling time, inventory of semi-finished jobs & work-in-progress costs.
• Offers reduced set-up, fastest stroke cycles for all jobs, minimizes the need to refer drawings for repeat runs.
• Back guage retraction on pinch point.