NC Shearing Machine

NC Shearing Machine

'ANASUYA' presents to you a range of most technically advanced Mechanical shearing machines with all latest features as per international standards.

  • The frame is steel-welded construction, vibrating to eliminate stress, with high strength and good rigidity.
  • Hydraulic driven and returning stroke is activated by the accumulator or nitrogen cylinder smoothly and promptly.
  • The sheet is moved easily through rolling ball equipped on worktable and protect the surface of sheet plate.
  • Closed loop control system is composed of NC controller and the encoder. It has the automatic function of inspection and compensation.
  • The back gauge driven by servo motor adopts rolling ball screw, rolling guiding way, so it's positioning precision could reach 0.10mm.
  • There is a display to count the number of cutting, the stroke of beam could be adjusted stepless.
  • The clearance of blades could be adjusted by hand Lever l, the value adjusted is display on the indicating plate.
  • Full machine is guarded with safety guard with interlocker to prevent the operator from injured.

Standard Accessories

  • Main Drive Motor
  • Electric Control Panel
  • NC back gauge with ball screw
  • Operational Console.
  • Lever operated blade clearance with calibration
  • Front sheet support
  • Hardened transfer bar mounted on table
  • Hold down cylinders
  • Four edge HCHCR / HCSR blade Interchangeable & suitable to shear mild and St. Steel

Optional Accessories

  • Second squaring arm on left side
  • Front support with roller according to required length
  • Rear sheet support
  • Ball transfer table
  • Degree protector for angular cutting
  • Stroke counter
  • Design with throat depth
  • First fill of hydraulic oil